Please ensure your tank is properly seated. It can sometimes take more pressure than expected to make sure the tank is attached properly.
If you are still getting the fill error, please follow the following steps:
- Fill the tank at least half full (or to max line)
- Ensure that the oven is powered on, but not running
- Press the fill icon to clear the notification
- Set the oven to the following settings: Sous Vide Mode = OFF / 212F / 100% steam.
This should immediately dose the boiler where steam is made and reset the sensors that detect when the oven is out of water.
If that didn’t help, please reach out to email@example.com